The F126 Series luminaire shall consist of an injection-molded UV stabilized tubular diffuser, a spun aluminum hood assembly, an internal optical system and a slip fitter (capital). The hinged hood shall rest on a cast aluminum ring welded to extruded aluminum struts. The diffuser shall be held in place with positive pressure applied by the hood assembly. As an option, lower third of the diffuser can be frosted. The fitter shall be made of cast aluminum and shall house the ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.



The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart.



All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

Ask about this product