The F162 Series luminaire shall consist of an injection-molded UV stabilized diffuser, a spun aluminum hinged hood assembly with a decorative spun copper cupola, an aluminum cage, an internal optical system and a mechanically fastened slip fitter (capital). The aluminum cage shall consist of four cast aluminum ornamental struts and a cast aluminum ring mechanically fastened together. The cage shall be secured to the gasketed cast aluminum fitter with stainless steel hardware. The fitter shall house a ballast assembly. The ballast assembly shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.



The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).



All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.