Home > Services & Support > Product Standard Color
Product Standard Color & Finishes PDF Print E-mail



We offer six standard colors for our customers to choose from. These colors have been selected to coordinate with the international RAL Color Matching System. A wide variety of other RAL or customs colors are also available (minimum order charges may apply, please contact us for pricing and availability).

 

Please note that there is no direct relationship between the RAL system and other color systems. However, we can offer to match custom color to within 2% color difference. A customer-supplied color chip of the required color is preferred for color matching. Once matched, the new custom color chip supplied by HCI must be approved by the customer prior to any fabrication. Please note that the color samples displayed above may differ from actual colors due to variations in types of computer displays. Color chips are avaiable upon request.

 

 


 

All aluminum products receive a four part corrosion inhibiting treatment. All steel products receive either yellow zinc treatment or are fully galvanized, depending on size. Cast iron products are usually prime painted only, with final finish to be applied in the field. This is due to possibility that damage to the finish would occur in transit because of the weight of such products. Cast iron items can be zinc plated as well, depending on product and project requirements.

 

All applicable parts receive standard electrostatically applied thermoset polyester powder coat TGIC finish with excellent weatherability, salt spray and chemical resistance. The finish has a minimum thickness of 3 mils with a smooth semi gloss surface with gloss of 55-65 degree. Indoor products receive standard hybrid finish, which is not suitable for outside use.