|
|
|
Description |
| |
 |
|
please click below for
more info. |
|
|
The F121-S Series luminaire shall consist of an injection-molded UV
stabilized acorn-diffuser with external prismatic optics, a spun
aluminum hood assembly and a mechanically fastened slip fitter
(capital). The diffuser
shall be secured to the cast aluminum fitter with stainless steel
hardware. The fitter shall be made of cast aluminum and shall house a
ballast assembly. The ballast shall feature quick
disconnect plugs for easy maintenance. The ballast shall be factory
wired, tested and mounted on a keyholed cast aluminum plate together
with a 4kV porcelain socket. Lamps are not included and shall be
supplied by others. All electrical components shall be UL listed and
labeled. |
| |
|
Installation |
|
The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and
shall be secured to the pole with three sets of two s/s hex socket
screws spaced 120 degrees apart (exception: fitters "A" and "H" secure
with four s/s bolts at 90 degrees apart). |
| |
|
Finish |
|
All applicable parts shall receive a standard electrostatically
applied thermoset polyester powder coat smooth semi gloss finish with
a four part corrosion inhibiting process. |
|
|
