Description	please click below for more info.     Standard Catalog Sheet Sample Configuration   Photometry Files Type III, 150HPS Type III, 175HPS Type V, 150HPS Type V, 175HPS
The F120 Series luminaire shall consist of an injection-molded UV stabilized acorn-diffuser, a spun hood assembly, a cast aluminum cage and a mechanically fastened slip fitter (capital). The cage shall consist of four struts with decorative medallions with a flower motif and a ring all jig-welded together. The cage and the diffuser shall be secured to the cast aluminum fitter with stainless steel hardware. The fitter shall be made of cast aluminum and shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.
Installation
The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).
Finish
All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

©2004-2007 HCI LIGHTING Ltd. All rights reserved.