Description	please click below for more info.     Standard Catalog Sheet Sample Configuration   Photometry Files 150HPS, IES III, refractor
The F103 Series luminaire shall consist of an injection molded UV stabilized globe, an internal optical system and a mechanically fastened slip fitter (capital). The globe shall be secured to the gasketed fitter with stainless steel hardware. The fitter shall be made of cast aluminum and shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.
Installation
The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).
Finish
All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.

©2004-2007 HCI LIGHTING Ltd. All rights reserved.